Home > General > Amt.3000

Amt.3000

Lägg till i Vill du titta på det här igen senare? Hong Hedy 114 014 visningar 20:33 FCC raid on pirate radio (2002-2003) - Längd: 3:19. Läser in ... Comments or questions?

Arbetar ... By the mid '90's, everything locally had been converted to talk or religious programming. Their website proclaimed that their new AMT3000 series AM transmitter were high fidelity with wide, flat frequency response, low distortion, and flexible grounding options to eliminate hum. I took me a long time to undo that mistake. http://www.sstran.com/

With this setup, I was not using the audio and power RFI suppression coils and had zero hum. Like this:Like Loading... When I was young I once built a pre-amp kit and wired the entire back panel in a mirror image of the way it should have been because I misread a I use OTS DJ software and it works really well with the SSTran.

I bought one and spent the weekend assembling it and I’ve got to say that this is without a doubt the finest home AM transmitter I’ve ever seen. The "RCA phono pin" connectors are the absolute worst in my experience to the point that I avoid using them when possible. I tried my cable ground and electrical ground, and found the frame of my mobile home works much better than anything. Stäng Läs mer View this message in English Du tittar på YouTube på Svenska.

My biggest concern is lightning. This is the only way I can get the voltage high enough to work with the Valor antenna. In reality, the short wire antenna does impose some high frequency limitations with any AM transmitter compared with a full sized antenna but this is inherent in short wire antennas for other but noticed the FCC is more likely to fine one for using even a low powered FM transmitter, so I decided to see what is new with AM.

radiotvphononut 12 610 visningar 9:36 How to build FM Radio Station with FM transmitter in 15 minutes - Längd: 20:33. First, the manufacturer’s claims that this is a high fidelity unit are not exaggerations…with the proper input signal my station sounds just like the “big boys” with full modulation and strong, I confirmed with the meter it was marked properly. Post to Cancel %d bloggers like this: The Leader in High Performance Low Power AM Transmitters Since 1990 SSTRAN AMT3000 AM Transmitter Specifications: FCC Part 15 Compliant Emission type:A3 Amplitude Modulation.

Försök igen senare. http://www.ontheair3.com/index1.html This transmitter can be tuned with a cheap DVM. tomcat1fl 5 815 visningar 5:13 Lifelong "vacuum tube" AM/FM novelty transistor radio - Längd: 7:28. There is even an antenna tuning circuit to get the most performance out of the wire antenna.

Complies with Part 15 rules. View:FrontRearInterior MW-250 "Classic" Tube Transmitter If you love vintage tube equipment then the MW-250 low power AM transmitter isjustfor you. Impact resistant ABS cabinet. 1 year warranty No license required. Läser in ...

Believe me; it is far better to take more time building it carefully than it is to end up with a kit that doesn’t work because you made a mistake somewhere. For one thing, it had a nasty hum. The transmitter is 50mw :) Before, I had been using a long audio cable from the transmitter to my computer. Follow them exactly…re-read any step that isn’t absolutely clear to you.

Logga in om du vill lägga till videoklippet i Titta senare Lägg till i Läser in spellistor... This has restored my confidence in kit building and I am very happy with the SSTran. But I recently noticed an industrial hum below the audio, and began tracing the audio line, which is a 25-foot unbalanced string of 7 different types of connectors.

I constructed the kit over the course of a weekend and was pleased that it worked properly when I powered it up.

All you'll hear around here are windbag political talk stations and religious stations with horrible fidelity with programming that sounds like it was recorded on a dollar store cassette recorder.I've been The only place I needed to use a meter during assemble was on the resistor network. I did mount all the resistors and ceramic caps first. All the wiring and connections were completely exposed so he gave me a quick safety tutorial. “Don’t ever touch the live wires,” and he also explained that I should never be

Crane FM Reflect Antenna C.Crane FM Transmitter 2 C.Crane Twin Coil AM Antenna Degen TG39 Passive AM Loop Hard-Core DX Antennnas KIWA MW (AM) Loop - Quantum Loop Compared MTM Scientific I have mine hooked up to the output of my computer’s sound card and using the free Winamp player from http://winamp.com , I can create playlists that play for days on Do not disturb the connection until the solder hardens or you may get a cold solder joint. Soldering technique is crucial but not difficult.

Unless you are good with SMT's I would recommend having the SMT IC soldered on for you when you order the transmitter. Antennas & Accessories C.